Sponsored
- Male
- 29/07/1999
- Followed by 0 people
Recent Updates
- Brief Introduction Of Injection MoldInjection molds are hollow, like common positioning component, guide bush, etc. - usually made of stainless steel - into which molten plastic is injected to make the desired part or product. They have holes in the middle of the shape of the part or product - called the mold cavity. In addition to the shape of the mold cavity, the number of mold cavities can also vary depending on the number of...0 Comments 0 SharesPlease log in to like, share and comment!
- The Basic Structure Of The Injection Molding MachineInjection molding machines consist of four main components: base, hopper, barrel, and clamping device. There are also smaller components, such as positioning components, nozzles, ejector pins, parting molds, clamping devices, and so on. A hopper is a component that pours plastic material before the injection molding process begins. Hoppers usually contain a drying unit to protect the plastic...0 Comments 0 Shares
- Guide Pin Material Selection ConsiderationsPTFE/bronze material guide bush remains the industry standard, providing robust and repeatable pad and lifter guidance over the life of the mold. They have become the industry standard and are replaced at a rate of less than 3% per year. Bronze/Graphite material guides are an excellent choice for demanding applications where pad or tappet travel needs to be held tighter for longer. Applications...0 Comments 0 Shares
- Different Kinds Of Spring CharacteristicsThe different types of springs are compression springs, extension springs, torsion springs, and constant force springs. The two most common types of springs are compression springs and extension springs. These screw mechanisms are usually made of metal, but occasionally other materials. Tension springs are coiled more tightly than compression springs, and both may have hooks or loops on...0 Comments 0 Shares
-
More Stories
Sponsored